www.lorextechnology.comLNC100 SeriesENGLISH VERSION 3.0WIRELESS NETWORK CAMERAUSER’S GUIDE
iv Features• iOS, Android, PC and Mac compatible1• Wi-Fi & wired internet connectivity2• Easy connection to Wi-Fi networks with WPS3• Night vision
84iPhone App5.4.12 CONFIGURING MICROSD RECORDINGConfigure video recording to the microSD card (required; not included). To playback recordings saved o
85iPhone AppEnglish5.4.13 CONFIGURING THE CAMERA RECORDING AND ALARM SCHEDULEConfigure schedules for recording and alarms. Schedules can be configured
86iPhone App8. Under SD card record, check Continuous for the camera to record to microSD continuously during the scheduled time. Check Motion trigger
87iPhone AppEnglishTo delete a Schedule:1. From the Scheduling menu, swipe the schedule you would like to delete from left to right.Swipe from left to
88iPhone App5. Use the slider to select your time zone.Select your time zoneEnable Daylight Savings and configure start and end times for daylight sav
89iPhone AppEnglish5.5 USING LOCAL SEARCH TO ADD CAMERASYou can use the Local Search Menu to automatically add the ID's for cameras on your local
90iPad App6. IPAD APPThe app for iPad is called Lorex Ping HD.For instructions on connecting to your camera using iPad, see “Connecting to your Camera
91iPad AppEnglish6.1.1 USING 2-WAY AUDIO (INTERCOM)1. While viewing, touch to activate 2-way-audio (intercom) using the phone microphone (speaker re
92iPad App4. During playback, tap in the display area to bring up playback controls.Tap to Select CameraTap to Select DayTap to play fileTap in the di
93iPad AppEnglishTo play back video recorded on the camera microSD card:1. Tap the Playback button () then tap SD Card.2. Select the camera you would
v TABLE OF CONTENTSEnglish1. Camera Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12. Getting Started . . . . . . . . . . .
94iPad App6.4 USING CAMERA LIST TO EDIT CAMERA SETTINGSYou can use the Camera List to adjust the connections settings or other settings for your camer
95iPad AppEnglish2. Change the Name and Password as needed.3. Under Dynamic icon update, select ON to have the camera icon automatically update every
96iPad App6.4.3 EDITING ALARM NOTIFICATIONS SETTINGS (PUSH NOTIFICATIONS)Push Alarm Notifications can be set up to create a notification straight to y
97iPad AppEnglish4. Under PIR, select ON to enable Push Alarm Notifications when motion is detected using the PIR motion sensor or OFF to disable.5. U
98iPad App• Under Frame rate, select the frame rate that will be used when connecting to the camera using a smart phone or tablet between 30fps (highe
99iPad AppEnglish+ Sunlight if the picture is too bright on the Indoor setting. If you select an indoor setting, select 60Hz or 50Hz to adjust the cam
100iPad App3. Under Status LED, select one of the following:• Normal: LED's will function as normal. For details on LED functions, see “Camera Ov
101iPad AppEnglish2. Tap Video Settings. Then tap Night Mode Control.Select Day/Night mode control type3. Select one of the following:• Auto: Camera w
102iPad App2. Tap Camera Settings. 3. Tap Network then Wired Network.Select DHCP or StaticIf Static, configure IP address information4. Select DHCP (r
103iPad AppEnglish3. Tap Network then WiFi Network.Slide Wi-Fi to ONTap your WiFi networkTap Other to connect to a hidden network4. Slide WiFi to ON t
vi3.7.4 Camera Info Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 483.8 Configuring L-View . . . . . . .
104iPad App2. Tap Camera Settings.Enable/disable email notificationsSelect email triggersSelect motion sensitivity for video motionEnable/disable emai
105iPad AppEnglish• PIR: Use the PIR motion detector to trigger email alarms. The PIR motion detector uses changes in temperatures (e.g. from a person
106iPad App4. Under Speaker Alarm Trigger, check the triggers that will cause speaker alarms:• Motion: Use Video motion detection to trigger audio ala
107iPad AppEnglish4. Tap Schedule then SD-Card.Enable microSD recordingSelect Always recording or Schedule recordingSelect if you want the camera to o
108iPad AppTo create a schedule for alarms or recording:1. First, you must enable alarms or recording to use the schedule.2. In Camera List, tap next
109iPad AppEnglish9. Under Time period, select one of the following:• Every week: Create a weekly recording schedule. Tap and check the days you wou
110iPad App3. Tap Admin then Date/Time.Tap Time Zone4. Tap Time Zone.5. Use the slider to select your time zone.• If your region observes Daylight Sav
111iPad AppEnglish6.5 USING LOCAL SEARCH TO ADD CAMERASYou can use the Local Search Menu to automatically add the ID's for cameras on your local
112Android App7. ANDROID APPThe app for Android is called Lorex Ping.For instructions on connecting to your camera using Android, see “Connecting to y
113Android AppEnglish7.1.1 USING 2-WAY AUDIO (INTERCOM)1. Touch to activate 2-way-audio (intercom) using the phone microphone (speaker required; not
vii5.4.5 Editing Camera Video Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 755.4.6 Configuring LED Control and Motion Dete
114Android App2. Tap the camera you would like playback.Tap the camera3. Select the date that you would like to playback video from, and then tap a vi
115Android AppEnglish7.3 PLAYING BACK VIDEO RECORDED ON MICROSD ON ANDROIDYou can playback video recorded on the camera microSD card (not included) on
116Android App4. Tap a day to view recordings for that day. Tap a recording to view it.Tap to view a recording5. Tap Disconnect to return to the recor
117Android AppEnglish7.4.1 EDITING CAMERA CONNECTION SETTINGSYou can edit your camera connection information. This is useful if you change the passwor
118Android App7.4.3 EDITING CAMERA MOBILE STREAMING SETTINGSConfigure the camera image quality settings for streaming to mobile devices (i.e. smart ph
119Android AppEnglish2. Tap Video Settings. Then tap Video.Select Color or Black & WhiteSelect BrightnessSelect SharpnessSelect environment settin
120Android App• Time Display on Video: Tap to select ON to enable time stamps on video or OFF to disable time stamps.• Video flip: Tap to select Video
121Android AppEnglish7.4.6 CONFIGURING NIGHT MODE SETTINGSConfigure when the camera uses day or night mode. When day mode is on, the camera sees in co
122Android App• Manual: Manually select day mode or night mode. If using this option, select Day for day mode or Night for night mode.4. Tap Update to
123Android AppEnglish2. Tap Alarm Notification.Enable/disable push notifications for video motion detectionEnable/disable push notifications for sound
viii7.1 Live Viewing with Lorex Ping for Android . . . . . . . . . . . . . . . . 1127.1.1 Using 2-way Audio (Intercom) . . . . . . . . . . . . . .
124Android App3. Tap Network then Wired Network.Select DHCP (recommended) or Static for a fixed IP addressIf Static, configure IP address information
125Android AppEnglish3. Tap Network then WiFi Network.Check to enable WiFiTap the network you would like to connect to and enter the passwordTap Other
126Android App3. Tap Schedule then Email Alarm.Enable/disable email notificationsSelect email triggersSelect motion sensitivity for video motionEnable
127Android AppEnglishNOTE: If you want to use a custom SMTP server to send Email messages, click SMTP Settings, enter your SMTP server information, an
128Android App• Scheduling: Create audio alarms based on the settings set in the Schedule. 7. Tap Alarm Test to sound a test alarm.8. Tap Update to sa
129Android AppEnglish• Schedule Recording: Camera will record according to settings set in the recording schedule.NOTE: To enable Motion detection rec
130Android App7. Under Speaker Alarm, check Motion trigger to create an audio alarm based on video motion, check PIR trigger to use the PIR motion sen
131Android AppEnglishTo delete a Schedule:1. From the Scheduling menu, press the Android menu button and tap Delete.Press the Android menu buttonTap D
132Android App4. Tap Time Zone.Tap Time Zone5. Use the slider to select your time zone.6. If your region observes Daylight Savings Time, check Dayligh
133Android AppEnglish7.5 USING LOCAL SEARCH TO ADD CAMERASYou can use the Local Search Menu to automatically add the ID’s for cameras on your local ne
ix8.4.4 Scheduling (Configuring Recording and Alarm Schedules) . . . . . . . 1488.5 Admin . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
134Configuring Camera Settings using a Web Browser8. CONFIGURING CAMERA SETTINGS USING A WEB BROWSERWeb Configure lets you modify camera settings usin
135Configuring Camera Settings using a Web BrowserEnglish8.1 WEB CONFIGURE OVERVIEW1. Information: View information about the camera and camera settin
136Configuring Camera Settings using a Web Browser8.2 NETWORKConfigure networking settings for WiFi or Ethernet connection.8.2.1 WIRED NETWORK (DHCP O
137Configuring Camera Settings using a Web BrowserEnglish• Use the following DNS server address: Select and then manually enter DNS server information
138Configuring Camera Settings using a Web Browser8.3 VIDEOConfigure camera video and streaming settings. Watch live video from the camera (Internet E
139Configuring Camera Settings using a Web BrowserEnglish8.3.2 VIDEO SETTINGSAdjust the video quality settings. Set the password to access camera vide
140Configuring Camera Settings using a Web Browser• Use the following values: Select to manually select the video resolution and frame rate for the ca
141Configuring Camera Settings using a Web BrowserEnglish• Enable audio microphone/Disable audio microphone: Select Disable audio microphone to disabl
142Configuring Camera Settings using a Web Browser4. Under Frame rate, select the frame rate that will be used when connecting to the camera using a s
143Configuring Camera Settings using a Web BrowserEnglishand the second set of drop-down menus to select when the camera will return to day mode.• Man
144Configuring Camera Settings using a Web Browser8.4 SCHEDULEConfigure recording to microSD card, configure email or speaker alarms, and setup the re
145Configuring Camera Settings using a Web BrowserEnglishNOTE: You may also select both PIR and Motion to receive alarms from both motion triggers.• S
146Configuring Camera Settings using a Web Browser8.4.2 SPEAKER ALARM (CONFIGURING AUDIO ALARMS)Configure audio alarms using a speaker (not included)
147Configuring Camera Settings using a Web BrowserEnglish8.4.3 SD CARD (CONFIGURING MICROSD RECORDING)Configure video recording to the microSD card (r
148Configuring Camera Settings using a Web Browser8.4.4 SCHEDULING (CONFIGURING RECORDING AND ALARM SCHEDULES)Configure schedules for recording and al
149Configuring Camera Settings using a Web BrowserEnglish• Fixed time: Create a one time schedule (for example, if you are going on vacation, and woul
150Configuring Camera Settings using a Web Browser8.5.1 ADMIN LOGINConfigure the admin user name and password for the camera. The admin user name and
151Configuring Camera Settings using a Web BrowserEnglish2. Click Save & Apply. Restart the camera by disconnecting and reconnecting the power ada
152Configuring Camera Settings using a Web Browser8.5.3 DATE/TIMEConfigure the camera date and time. The camera syncs with an Internet NTP time server
153Configuring Camera Settings using a Web BrowserEnglish2. In L-View, right-click on the camera in Auto Search and click Web Configure.Right-click th
1Camera OverviewEnglish1. CAMERA OVERVIEW1234657981. Camera Lens: The camera has separate lenses for day/night use.2. Microphone3. WPS Button: Used to
154Configuring Camera Settings using a Web Browser8.5.5 REBOOTRestart the camera from your Internet browser. This is useful if you need to restart the
155Technical SpecificationsEnglish9. TECHNICAL SPECIFICATIONSAs our product is subject to continuous improvement, Lorex Technology & subsidiaries
156Cleaning and Disposal10. CLEANING AND DISPOSALClean camera with a slightly damp cloth or an anti-static cloth. Never use cleaning agents or abrasiv
157NoticesEnglish11. NOTICESWarning: Any changes or modifications not expressly approved by the grantee of this device could void the user's auth
158Wall or Ceiling Mounting12. WALL OR CEILING MOUNTING12.1 INSTALLATION TIPS AND WARNINGS• Camera is rated for indoor use only. Do not install in wet
159Wall or Ceiling MountingEnglish3. Attach the camera to the wall or ceiling using the included mounting screws. Adjust the camera angle as necessary
160Troubleshooting13. TROUBLESHOOTINGWPS Wireless Setup does not work or router does not support WPS:• Connect the camera to the router using Ethernet
161TroubleshootingEnglishCannot access Web Configure on PC:• Camera may be on different network than computer. Connect the camera and computer to the
2Camera Overview8. CamID Label: Shows the camera’s CamID number and a QR code for easy setup using mobile devices.9. NET: Connect an Ethernet cable an
Copyright © 2013 Lorex Technology Inc.LNC100 Serieswww.lorextechnology.comVersion 3.0
3Getting StartedEnglish2. GETTING STARTED2.1 BASIC SETUP1. Connect the power adapter cable to the power adapter using the USB connector.Power AdapterP
4Getting Started3. A: Connect an Ethernet cable (included) to the NET port on the camera and connect the other end to an available LAN port (usually n
5Getting StartedEnglish2.2 CONNECTING TO YOUR CAMERAOnce your camera is connected to your wired or wireless network, you can connect to your camera us
6Getting Started2. Double-click the camera under Auto Search or click and drag the camera to a desired screen on the display grid to connect to the ca
7Getting StartedEnglish5. Under New Password, enter a password that will be used for the camera. Under Confirm Password, enter the password again. Cli
8Getting Started5. Under Password, enter the camera password. If this is the first time connecting to the camera, the password is lorex. Click OK.Ente
9Getting StartedEnglish2. Extract the installer file and double-click it to run.3. Click and drag the L-View icon to Applications to install.Click and
10Getting Started4. If this is the first time connecting to the camera, you are prompted to change your password. Click OK.5. Enter a new password and
11Getting StartedEnglishConnecting to your Camera over the Internet (Mac)1. Right-click Camera List and then click New camera.Right-click Camera List
12Getting Startedhighlighted. Then, double-click the camera to open it in the selected area. Click to select a display areaThen, double-click a camera
13Getting StartedEnglish3. Tap + to add a camera.Tap +4. Under Name, enter a name for your camera. This can be anything of your choice.Enter a name fo
NEED HELP?CONTACT US FIRST2 Easy Ways to Contact UsPlease make sure to register your product at www.lorextechnology.comto receive product updates and
14Getting Started6. Under Password, enter the camera password. If this is the first time connecting to the camera, enter lorex. Press Done.Enter the c
15Getting StartedEnglish2.2.4 CONNECTING TO YOUR CAMERA ON IPADThe app for iPad is called Lorex Ping HD.To connect to your camera using iPad:1. Downlo
16Getting Started4. Under Name, enter a name for your camera. This can be anything of your choice.Enter a name for your camera of your choice5. Under
17Getting StartedEnglish6. Under Password, enter the camera password. If this is the first time connecting to the camera, enter lorex. Press Done.Ente
18Getting Started9. Under New password, enter a new password for the camera and repeat the password under Confirm password. Tap Done.Enter a new passw
19Getting StartedEnglish4. Under Camera Name, enter a name for your camera. This can be anything of your choice.Enter a name for your camera of your c
20Getting Started6. Under Password, enter the camera password. If this is the first time connecting to the camera, enter lorex. Press OK.Enter the cam
21Getting StartedEnglish2.3 WIFI SETUPYou can setup the camera to use WiFi using your PC, Mac, iPhone, iPad, or Android phone or tablet. You can also
22Getting Started5. Click WiFi Scan and select your WiFi network from the list.WiFi ScanClick your WiFi network from the list6. Under WPA-PSK Key or W
23Getting StartedEnglish7. Click WiFi Security again and click WiFi Test (this may take up to 60 seconds).WiFi test8. When successful, Status will say
FEB 12 2013 - R15¿NECESITA AYUDA?COMUNÍQUESE PRIMERO CON NOSOTROSBESOIN D’ASSISTANCE?COMMUNIQUEZ D’ABORD AVEC NOUS 2 façons simples de communiquer av
24Getting Started3. Tap Camera Settings. Enter the camera’s admin username and password. By default, the admin username is admin and the password is l
25Getting StartedEnglish10.Tap the camera in the Camera List to connect. If you cannot connect, check to make sure you have entered the correct wirele
26Getting Started6. Tap the name of your WiFi network, enter the password, and tap OK. Wait for the update to complete.Slide Wi-Fi to ONTap your WiFi
27Getting StartedEnglish3. Tap Camera Settings. Enter the admin username and password. By default, the admin username is admin and the password is lef
28L-View 104 for PC3. L-VIEW 104 FOR PCL-View is a PC client software that supports up to 4 cameras. L-View is provided on the CD or available as a
29L-View 104 for PCEnglish3.2 L-VIEW FOR PC INTERFACE1. Display: Shows live or recorded video from your camera(s). • Click to select a camera and scro
30L-View 104 for PC• microSD: Click to open a list of recordings saved on the camera’s microSD card (not included). See “Playing Back Recordings on
31L-View 104 for PCEnglish• Use the top volume slider to control the volume for the camera speaker (not included) when the 2-way-audio is activated.•
32L-View 104 for PC3.2.1 DISPLAY SUB-MENUThe Display sub-menu opens when you right-click on a camera’s display area. It contains additional camera con
33L-View 104 for PCEnglish3.2.2 ALL CAMERA ACTIONPress to open the All Camera Action menu.The All Camera Action Menu contains the following controls
FEB 12 2013 - R9LOREX IS COMMITTED TO FULFILLING YOUR SECURITY NEEDS• We have developed user friendly products and documentation. Please read the Q
34L-View 104 for PC3.3.1 ADDING CAMERAS TO CAMERA LIST• If the camera is on the local network, click and drag a camera from the Auto Search list to Ca
35L-View 104 for PCEnglishNOTE: To change the camera’s password, see “Video Settings” on page 139.To save the camera password:1. Right-click on the ca
36L-View 104 for PC3.3.4 CONFIGURING MOBILE STREAMING SETTINGSConfigure streaming settings when connecting using a smartphone or tablet.Select Bandwid
37L-View 104 for PCEnglish3.3.5 CONFIGURING NIGHT MODE CONTROLConfigure when the camera uses day or night mode. When day mode is on, the camera sees i
38L-View 104 for PC• Manual night mode control: Manually select day mode or night mode. If using this option, under Mode, select Day for day mode or N
39L-View 104 for PCEnglish3.5 L-PLAY: PLAYING BACK VIDEO FROM YOUR PC’S HARD DRIVEL-Play is used to playback video files saved to your computer’s hard
40L-View 104 for PC• Click a day to select it.5. Click the ID of the camera you would like to playback video from and then click Play.Click the camera
41L-View 104 for PCEnglish6. Use the on-screen controls to control playback.MinimizeMaximizeExitSearch for videoOpen in full-screenTime video was reco
42L-View 104 for PC3.6 PLAYING BACK RECORDINGS ON THE MICROSD CARD WITH L-VIEWYou can use L-View to playback recorded video on the camera’s microSD ca
43L-View 104 for PCEnglish5. Click a recording from the list and then click Playback to view it.Click a recording from the listClick Playback to play6
FEB 12 2013 - R9LOREX SE COMPROMETE A SATISFACER SUS NECESIDADES EN SEGURIDADLOREX S’ENGAGE À RÉPONDRE À VOS BESOINS EN MATIÈRE DE SÉCURITÉESTE PRODU
44L-View 104 for PC3.7.1 QUALITY TAB (CONFIGURING RESOLUTION, FRAME RATE, AND BANDWIDTH)Select Internet connection speedCheck to automatically adjust
45L-View 104 for PCEnglish• Select Video Motion to have the camera maintain the frame rate and reduce image quality when bandwidth is insufficient.• S
46L-View 104 for PC3. Under Place, select Outdoor video if the area with the camera is brightly lit. Select Indoor Video if you notice strip lines in
47L-View 104 for PCEnglish3.7.3 CONTROL TAB (CONFIGURE STATUS LED’S AND MOTION DETECTION SENSITIVITY)Configure status LED’sConfigure motion detection
48L-View 104 for PCbe triggered if a moving object is larger than 1% of the video area. If it is set to 10, a moving object must be larger than 10% of
49L-View 104 for PCEnglish3.8 CONFIGURING L-VIEWTo configure settings for L-View, click the settings button ( ).3.8.1 DIRECTORIES (OPENING OR CHANGING
50L-View 104 for PC3.8.2 STARTUP OPTIONSThe Startup options menu allows you to configure startup options for L-View.Check for L-View to open automatic
51L-View 104 for PCEnglish3.8.3 FIXED IP ACCESSThe Fixed IP Access menu is for advanced users only. It must be used if you have assigned your camera a
52L-View 104 for PC3.8.4 LOGIN (ENABLING A PASSWORD TO ACCESS L-VIEW)The Login menu allows you to enable a password to open L-View.Select EnableEnter
53L-View 104 for PCEnglishTo configure Image Ratio:1. Check Keep Image Ratio to not allow any stretching of the image (bars may appear on the sides of
iWelcome!Thank you for purchasing this Lorex wireless network camera. This user’s guide refers to the following models:• LNC101• LNC104ContentsBefore
54L-View for Mac4. L-VIEW FOR MACL-View for Mac allows you to view your camera on a Mac computer. L-View for Mac is available as a free download from
55L-View for MacEnglish1. Window Controls: Click to exit or minimize L-View.2. Camera List: Shows cameras that have been saved in L-View. Double-click
56L-View for Mac• Folder: Click to open the recording folder or snapshot folder for this camera. 7. Display Area: Shows video from your camera. • Do
57L-View for MacEnglishsetting. Enter the camera password. If you want, you can also enter a Camera Name of your choice for your camera. Click OK.• If
58L-View for Mac2. Press the recording button again ( ) to stop recording.Click to Start/Stop recording4.4.1 PLAYING BACK VIDEO FROM YOUR MAC’S HARD D
59L-View for MacEnglish3. Select the video file you would like to playback.Click the arrow next to Recording to expand the recording listClick the arr
60L-View for Mac4.5 PLAYING BACK RECORDINGS ON THE MICROSD CARD WITH L-VIEWYou can use L-View to play back recordings on the camera’s microSD card (no
61L-View for MacEnglish4.6 USING CAMERA LIST TO MODIFY CAMERA SETTINGSYou can use L-View to configure certain settings for the camera.TIP: Change only
62L-View for MacTo configure image quality settings:1. Right-click on the camera in Camera List and select Video settings. Select the Quality tab.2. U
63L-View for MacEnglish4.6.2 VIDEO TAB (CONFIGURE GENERAL VIDEO SETTINGS)The Video tab allows you to configure general video settings, such as color a
ii Safety Instructions• Read this guide carefully and keep it for future reference.• Camera is rated for indoor use only. • Do not use in wet or humid
64L-View for Mac8. Check Enable time display on video to turn on video time stamps or un-check it to disable video time stamps.9. Under Microphone, se
65L-View for MacEnglish3. Click Update to save changes. Enter the camera admin user name (default: admin) and password (default: left blank) and click
66L-View for Mac4.6.5 CONFIGURING NIGHT MODE SETTINGSConfigure when the camera uses day or night mode. When day mode is on, the camera sees in color.
67L-View for MacEnglish• Manual night mode control: Manually select day mode or night mode. If using this option, under Mode, select Day for day mode
68iPhone App5. IPHONE APPThe app for iPhone is called Lorex Ping iPhone.For instructions on connecting to your camera using an iPhone, see “Connecting
69iPhone AppEnglish5.1.1 USING 2-WAY-AUDIO (INTERCOM)1. While viewing, touch to activate 2-way-audio (intercom) using the phone microphone (speaker
70iPhone App5.2 PLAYING BACK VIDEO RECORDED ON IPHONEAfter using the record button to record video to your iPhone, you can playback video on iPhone.5.
71iPhone AppEnglish3. Select the camera you would like to playback from. Select camera for microSD playback4. The camera scans for recorded video file
72iPhone App5.4.1 EDITING CAMERA CONNECTION SETTINGSYou can edit your camera connection information. This is useful if you change the password of the
73iPhone AppEnglish2. Tap next to the camera you would like to delete then tap Delete to confirm.Then tap DeleteTap here3. Tap Done.5.4.3 EDITING AL
iiiIf using this product as a baby monitor:We advise you to take the following precautions to avoid possible injury to infants:• DO NOT place the came
74iPhone App3. Under Motion, select ON to enable Push Alarm Notifications when motion is detected using video motion detection or OFF to disable.4. Un
75iPhone AppEnglish4. Under Auto, select ON to have the camera automatically select the resolution and frame rate based on available bandwidth. Or, se
76iPhone App4. Configure the following:• Video color: Select Colored to view the camera in color or select Black & white. Tap Video to return to V
77iPhone AppEnglishTo configure LED’s and motion detection sensitivity:1. In Camera List, tap next to the camera.2.Tap Video Settings. Then tap Contr
78iPhone App2. Tap Video Settings. Then tap Night Mode Control.Select Night Mode control type3. Select one of the following:• Auto: Camera will automa
79iPhone AppEnglish• Manual: Manually select day mode or night mode. If using this option, select Day for day mode or Night for night mode.4. Tap Upda
80iPhone App4. Select DHCP (recommended) to allow the camera to automatically obtain an IP address from the router or Static to use fixed IP address s
81iPhone AppEnglish9. Tap the camera in the Camera List to connect. If you cannot connect, check to make sure you have entered the correct wireless pa
82iPhone App6. Check the following trigger options for email alarms:• Motion: Use Video motion detection to trigger email alarms. Video motion detecti
83iPhone AppEnglish3. Tap Schedule then Speaker Alarm.Select speaker alarm triggersTest speaker alarmSelect number of times speaker alarm will repeat4
Kommentare zu diesen Handbüchern